Home OS/2 Warp Contact Me About Me
 
OS/2 Warp Introduction
os2warp.be Hardware List
OS/2 and WiFi WLAN
OS/2 and eCS Modems
OS/2 and PCI-X
PCI sound cards for eCS and OS/2
Daniela's Enhanced Drivers
OS/2 and USB Web Site
OS/2 NICPAK
OS/2 and Gigabit LAN
NoteBook/2 web site
Gomi NDIS MAC drivers
Scanning with Tame/2
OS/2 and RAID Solutions
Win32prn Printers Project
UniAud Project
 UniAud Device Listing
 UniAud FAQ
 Downloads
 Get Support
 Report Compatible Devices
OS/2 and FireWire (IEEE1394)
PCMCIA Socket Chipsets
The SCSI Workshop
Technical Support Center
Download Center
test
 

Related Links:
os2warp.be Technical Support
Advanced Linux Sound Architecture
OS/2 Device Driver Pak OnLine
OS/2 Warp Compatible Hardware List Web site: UniAud FAQ

UniAud Project: The one-and-only soundcards device driver.
Frequently Asked Questions.


© 2003-2004, Vlad Stelmahovsky, os2warp.be

UniAud is still under development and we need your feedback to improve UniAud. Its very important that you also report soundcards that work! UniAud is project created by InnoTek Systemberatung GmbH. UniAud is based on the Linux ALSA project. UniAud supports a broad range of PCI audio cards/chipsets and AC97 audio codecs. AC97 audio codecs can be found in modern systems with a Pentium II or higher processor on the motherboard. AC97 depends for a part of the motherboard chipset and a small audio codec.

UniAud is still under development and we need your feedback to improve UniAud. Its very important that you also report soundcards that work! Bugs can be reported via the os2warp.be Technical Support Center.

Q:What is UniAud?
A:The UniAud project is the universal audio driver for OS/2 or eComStation OS, based on ALSA project.


Q:On my great Thinkpad notebook everything detected ok, but sound plays only 1 sec. What have I do?
A:Go to ThinkPad setup and Disable USB BIOS.


Q:Uniaud detected my card successfully but no sound.
A:Try to install uniaud with amount of installed cards = 0 (see section below) reboot and then install uniaud with amount of cards = 1.


Q:Uniaud detected my card successfully but when I try to play something I got error: MCI Error 5134: No device driver found.
A:Replace :\MMOS2\MMPM2.INI with one, that comes with this pack reboot and reinstall Uniaud.


Q:Uniaud detected my card successfully but when I try to play something I got repeat sound.
A:Make sure than your audio PCI device has exclusive irq (it is not necessary in meanwhile but some PCI devices cannot work on same shared irq). Useful tool for that is pci.exe, which you can download here.


Q:Where can I get support for UniAud?
A:At www.os2warp.be/support/ both the developers and the whole os2warp.be team, in association with the eComStation.com support team will help you to resolve possible problems and/or bugs.



USE THIS INFORMATION, AT YOUR OWN RISK. THE INFORMATION PROVIDED IN THIS WEB SITE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. WE DISCLAIM ALL WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. WE CANNOT TO BE HELD RESPONSIBLE FOR ANY POSSIBLE LOSS OF DATA, NOR TO EVENTUAL DAMAGE TO YOUR COMPUTER SYSTEM.
For more information, refer to our copyrights page. None of these drivers nor information provided via this website may not be hosted elsewhere but this web site, except with written permission of both developer and os2warp.be



Copyright Information


Last modified: 2004/08/30, 16:49 | This site is sponsored by Mensys B.V.